Author: jsroch

Chill Release 110

Written by jsroch on . Posted in Products. Leave a Comment

Chill Release 110

Silicone Based Mold ReleaseAgent

Try it now

Description

CHILL RELEASE 110™ is a silicone based compound primarily formulated to be used as a release agent in epoxy, rigid and elastomeric polyurethane and metal molds. Can also be used in various industrial applications.

Characteristics

  • Very Low viscosity  (10 cps)

  • Easy to use

  • Transparent

  • High coverage

  • Available in .500ml and 1L formats

  • Best alternative to  replace using tape for molds

Applications

We do recommend to apply 2 to 3 layers of 0.001 inch on a new mold. Please make sure that you let sit the release agent 10-15 minutes @ 22°C before you apply another layer. Use a clean cotton cloth or a paint brush, making sure to avoid drips.

Please consult POLYMÈRES TECHNOLOGIES for additional information based on your application.

  • Products

    “BYE BYE TAPE “

    The TECHNO RELEASE 110 is a silicone base compound primarily formulated to be used as a release agent the epoxy.  Applying 2 to 3 layers of 0.001 inch on a new mold will save you time, money but mostly remove any tape marks designs on your epoxy.

  • Typical properties

    AT 22°C / 72°F

    Generic Type Silicone
    Consistency  Liquid
    Viscosity (Brookfield Test) 10 cps @ 25°C
    Specific Gravity 0.70 g/cm2
    Color Transparent
    Flash Point (closed cup °C)  < 15

  • 1

  • 1

  • 1

  • 1

  • 1

  • 1

  • 1

Chill Pigments

Written by jsroch on . Posted in Products. Leave a Comment

CHILL PIGMENTS

metallic powders

See available color

Description

CHILL PIGMENTS™ metallic powders are highly concentrated colour pigments. Completely compatible with all the products of our CHILL EPOXY line. Strong colours will be achieved by using them with our low viscosity epoxy solution.

It is recommended to start with 2-3% of the volume of epoxy to build the color.

Instructions Sheets

Characteristics

  • Mica Powder Pigments

  • Non-Toxic

  • Low Micron ( Weight)

  • Wide variety of colors

  • Available in 1oz or 3oz

  • Pigment is sold by weight 

Applications

The CHILL PIGMENTS™ have been selected to be the lowest weight possible for a better resin dispersion. Our CHILL PIGMENTS™ mix easily with all our different systems. It is also possible to combine colors for a more effects. 

It is recommended to start with a small amount of CHILL PIGMENTS™ in order to build your color and intensity. Adding too much pigments will only saturate your resin and the majority will sink.

Products

While most pigments available on the market are not selected specifically for mixing with epoxy resins, we select our pigments to be the lowest “MICRONS” possible for a better dispersion in our CHILL EPOXY™ casting systems.

No need to saturate the resin. Simply add a little and build your color. It is recommended to start with 2-3% of the volume of epoxy to build the color.

  • 1

  • 1

  • 1

  • 1

Available colors

  • 3rd Place

  • Appletini

  • Bermuda Triangle

  • Black Eye

  • Black Hole

  • Bloody Cesar

  • Coffee Break

  • Cosmic Gate

  • Dirty Dog

  • Disco Ball

  • Gold Digger

  • Jungle Boogie

  • Pumpkin Latte

  • Resin Berry Blue

  • Shark Attack

  • Smash Eggplant

  • Smoking Muppet

  • Spring Break Regrets

  • White Russian

  • Wine Stain

Chill Deep

Written by jsroch on . Posted in Products. Leave a Comment

Chill Deep pour

Transparent epoxy resin for 2-2.5″ river tables in a single pour 

Description

CHILL DEEP POUR is a 100% reactive epoxy system with very low viscosity and high ultraviolet resistance. The CHILL DEEP POUR makes it possible to cast river tables, from 60-100 liters, between to 2” and 2.5” thick, in a single casting depending on the form and mass, while maintaining its transparency and high precision.

Its long pot life makes it possible to mix several liters at a time and to pour a large quantity of resin during the production of the river table.

The CHILL DEEP POUR demolding time is 7 days at 22C/74F.

This system also meets the European RoHS standard.

Characteristics

  • High quality raw materials
  • Easy mixing ration of 2A/1B by volume

  • 7 days curing time

  • No cooling systems needed

  • Excellent UV resistance
  • Glossy Finish
  • Excellent impact resistance
  • Very low viscosity
  • Crystal clear transparency
  • Meet the RoHS standard
  • No withdrawal

Applications

Store CHILL DEEP POUR on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL DEEP POUR, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 10 minutes with a metal spatula. Don’t forget to scrape the sides and bottom.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 44 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 1800 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products

    The CHILL DEEP POUR   is our slowest epoxy solution and his actually the CHILL ICE 2 big brother.

    This epoxy casting resin will allow you to pour between 2.0-2.5 inches thick and with a mass of up to 90-110 liters depending on the design of the river. Its extended pot life and Extremely Low viscosity is offering the best bonding and while getting rid of the bubbles within minutes. Basically “No need” for torches anymore.

    THE CHILL DEEP POUR allows you to pour bigger and deeper project once again without the need to babysit or the need to cool it down. When most epoxy solution at 2 inches thick will require Fans, heat sink or AC, the CHILL DEEP POUR  has a very controlled exothermic reaction so you don’t have to put out extra work.

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 700 55 195
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.10 0.94 1.035
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 44 100/44
    Color   Transparent Transparent Transparent
    Pot life   >1800 minutes >1800 minutes >1800 minutes
    Gel Time   >2000 minutes >2000 minutes >2000 minutes
    Peak Exothermic Temperature ASTM D 2471-71 ~75-80°C ~75-80°C ~75-80°C
    Full cure*   7 days @ 22°C 7 days @ 22°C 7 days @ 22°C

  • Questions

    • Item 1

      Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

    • Item 2

      Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor reprehenderit.

    • Item 3

      Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat proident.

Chill Ice 2

Written by jsroch on . Posted in Products. Leave a Comment

Chill Ice 2

Transparent epoxy resin for 2 inch castings

Description

CHILL ICE 2™ is a 100% reactive epoxy system with very low viscosity and high ultraviolet resistance. The CHILL ICE 2™ makes it possible to cast river tables up to 2 inch thick up to 60L, in a single casting, while maintaining its transparency and high precision.

Its long pot life makes it possible to mix several liters at a time and to pour a large quantity of resin during the production of the river table.

This system also meets the European RoHS standard.

Characteristics

  • High quality raw materials
  • Easy mixing ration of 2A/1B by volume
  • Excellent UV resistance
  • Glossy Finish
  • Excellent impact resistance
  • Very low viscosity
  • Crystal clear transparency
  • Meet the RoHS standard
  • No withdrawal

Applications

Store CHILL ICE # 2 on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL ICE # 2, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 5 to 10 minutes with a metal spatula.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 600 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products

    CHILL ICE 2™ – 2:1 ratio is our most polyvalent epoxy solution when it comes to slow setting epoxy. This system will allow you to cast 2-inch-thick river tables when doing medium to big size projects. The CHILL ICE 2™ can also be used to encapsulate objects using molds. Its extended pot life makes it possible to mix several liters at a time and to pour a large quantity of resin in a single pour without overheating or the need to use Fans or AC during the production of river tables.

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 750 55 200
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.095 0.955 1.048
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   600 minutes 600 minutes 600 minutes
    Gel Time   750 minutes 750 minutes 750 minutes
    Peak Exothermic Temperature ASTM D 2471-71 82°C 82°C 82°C
    Full cure*   7 days @ 22°C 7 days @ 22°C 7 days @ 22°C

Chill Ice 1

Written by jsroch on . Posted in Products. Leave a Comment

Chill Ice 1

Transparent epoxy resin for 0.5-1.5 inch casting

Description

CHILL ICE 1™ is a 100% reactive epoxy system with very low viscosity and high ultraviolet resistance. The CHILL ICE 1™ makes it possible to cast river tables up to 1.5” thick, in a single pour, while maintaining its transparency and high precision.

CHILL ICE 1™ will best perform between 0.5 up to 1.5″ thick. Under 0.5″ it will take longer to fully cure.

Its long pot life makes it possible to mix several liters at a time and to pour a large quantity of resin during the production of the river table.

This system also meets the European RoHS standard.

Characteristics

  • High quality raw materials
  • Easy mixing ration of 2A/1B by volume

  • Extended pot life of 500 minutes

  • Excellent UV resistance
  • Glossy Finish
  • Excellent impact resistance
  • Very low viscosity
  • Crystal clear transparency
  • Meet the RoHS standard
  • No withdrawal

Applications

Store CHILL ICE 1™ on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL ICE 1™, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 5 to 10 minutes with a metal spatula.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 500 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products

    The CHILL ICE 1™ – 2:1 ratio is our first casting resin for making river tables or projects between 0.5 and 1.5 inch thick in a single pour can be poured up to 60L liters in mass.

    Very low viscosity for a better penetration and bubbles release, the CHILL ICE 1™ is ideal for medium size project up to 1.5 inches thick such as coffee tables, river tables, charcuterie board and any type of casting between the recommend thickness. The CHILL ICE 1™ because of its formulation will cure faster than the CHILL ICE 2 or CHILL DEEP POUR but is limited to 1.5 inches thick maximum.

     

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 725 50 195
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.08 0.95 1.03
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   500 minutes 500 minutes 500 minutes
    Gel Time   550 minutes 550 minutes 550 minutes
    Peak Exothermic Temperature ASTM D 2471-71 86°C 86°C 86°C
    Full cure*   7 days @ 22°C 7 days @ 22°C 7 days @ 22°C

Chill Clear

Written by jsroch on . Posted in Products. Leave a Comment

Chill Clear™

Transparent epoxy resin for layers up to 1/2″

Description

CHILL CLEAR™ is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet . CHILL CLEAR™ allows the cast up to 0.5 inches thick to cast transparent pieces such as jewelery, coasters, painting, flood coat, countertops or as topcoat on river tables.

Its pot life of 60 minutes allows a fast handling time. Its very low viscosity allows maximum infiltration of the interstices in the moulds or the different substrates on which CHILL CLEAR™ is poured.

This system also meets the European RoHS standard.

Characteristics

  • High quality raw materials
  • Easy mixing ration of 2A/1B by volume
  • Excellent UV resistance
  • Glossy Finish
  • Excellent impact resistance
  • Very low viscosity
  • Crystal clear transparency
  • Meet the RoHS standard
  • No withdrawal
  • 100% solid, without VOC

Applications

Store CHILL CLEAR™ on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL CLEAR™, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 5 to 10 minutes with a metal spatula.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 60 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment.

The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products

    The CHILL CLEAR™ is a very polyvalent system used for many applications.

    This fast setting epoxy with 60 min of pot life can be used to cast up to ½ inch thick, to cast transparent layers such as countertops or as topcoat on river tables.

    With 60 minutes of pot life and its very low viscosity the CHILL CLEAR™ will offer maximum infiltration of the interstices in the molds or the different substrates on which CHILL CLEAR™ is poured. It is frequently use to fill inlays, CNC logo, maps and letters.

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 725 55 205
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.14 0.965 1.06
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   60 minutes 60 minutes 60 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 168°C 168°C 168°C
    Full cure*   3 days @ 22°C 3 days @ 22°C 3 days @ 22°C

Chill Diamond Fast

Written by jsroch on . Posted in Products. Leave a Comment

Chill Diamond Fast™ 

 

 

Description

CHILL DIAMOND™  is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet.

CHILL DIAMOND FAST™  is ideal to fill small cracks, voids and knots. It can also be use to cast small transparent objects or colored jewels such as earrings, necklaces, bracelets, hairpins, cufflinks and others.

Its pot life allows a fast handling time, less than 12 hours. His very low viscosity allows a maximum infiltration of the interstices in the moulds or the different substrates on which CHILL DIAMOND™  is poured.

This system also meets the European RoHS standard.

Characteristics

  • Crystal clear transparency

  •  24 minutes of pot life

  • 100% solid, without VOC

  • Excellent heat resistance

  • Very low viscosity
  • Easy mixing ration of 2A/1B by volume
  • Excellent UV resistance
  • Glossy Finish
  • High quality raw materials
  • No withdrawal
  • Excellent impact resistance

Applications

Store CHILL DIAMOND FAST™  on a pallet (do not store directly on the floor) or shelf @ 22C/72F with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL DIAMOND FAST™ , be sure to mix each Part A (RESIN) and B (HARDENER).

Minimize air formation as much as possible by gently mixing for a minimum of 8 to 10 minutes with a metal spatula.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 24 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products

    THE CHILL DIAMOND FAST™ …WHY FAST??? 

     Very simple…Because this system is our most reactive to this date. With a Pot life of 24 minutes at 72F and a Ratio of 2:1 by volume, this fast setting epoxy is ideal for filling small cracks, voids and knots on wooden surfaces.

    Who wants to wait 3 days when filling small cracks or casting small mass anyway? Well, The DIAMOND FAST ™ will cure in less than 12-24 hours depending on the mass.

    Also ideal for the rapid production and release of small casting such as jewelry or other artistic and industrial pieces. It is also commonly use to seal live edge prior to pour a river table.

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 675 40 185
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.125 0.948 1.078
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   24 minutes 24 minutes 24 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 168°C 168°C 168°C
    Full cure*   2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece.

P-Tec 8400

Written by jsroch on . Posted in Products. Leave a Comment

P-TEC 8400™

1:1  ratio Polyurethane WOOD repair paste

VIDEO AVAILABLE IN HD FULL SCREEN FOR BEST QUALITY

Description

P-TEC 8400™ is a 100% solid, thixotropic and low density polyurethane repair paste for the repairing of wood. This product is used for fast repairing of CNC machined molds or prototypes made out from polyurethane boards or wood which show fissures, voids or any defects to the surface. The P-TEC 8400™ can also be of good help to repair damaged edges and design modification.

This product can also be used as an adhesive to structurally assemble polyurethane boards and wooden panels among others.

Characteristics

  • Easy mixing ratio of 1A/1B volume

  • NO VOC

  • FOOD SAFE

  • No shrinkage
  • No odor
  • Fast and easy sanding process
  • Fast setting time of 18 minutes at 22°C.
  • Excellent thermal and dimensional stabilities
  • Compatible with many surface coatings
  • Excellent adhesive for many substrate

  • Available in Black, Beige or Brown (cognac)

  • Can be colored with our CHILL DROPS™ (BEIGE KIT)

Applications

Both parts must be thoroughly mixed according to the mixing ratio indicated on this technical data sheet. Before use, check that the support is free of any dust, grease or pollution. During processing, pot life and time before sanding may vary depending on the ambient temperature.

The exothermic that will develop during hardening varies with the thickness of product applied, up to a maximal value of 79ºC (174ºF)

Advice

Test is necessary when using painting in order to verify compatibility between the putty and the primer.

AVAILABLE COLORS

  • Products

    P-TEC 8400™ is a low density polyurethane repair paste ideal to fill cracks, voids or knots.  Easy mixing ratio of 1A/1B volume, the P-TEC 8400™ can be sanded in less than 20 minutes.

    Mix both parts thoroughly to obtain a uniform color. Once the two parts are thoroughly mixed together, you have 4 minutes to apply the product at 72F (22C).

    Once ready to sand, Use a 120 sandpaper to begin with to erase the rings around the cracks and finish up with the 150 sandpaper. 

    Available in Black, Beige or Brown (cognac)

     

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) Paste Paste Paste
    Density g/cm3 0.88 0.88 0.88
    Mixing Ratio By volume 1 1 1/1
    Mixing Ratio By weight 100 100 100/100
    Color   Greenish grey Beige Greenish grey
    Pot life ASTM D 2471 5 minutes at 22°C 5 minutes at 22°C 5 minutes at 22°C

  • Questions

    • Is the P-TEC 8400 food safe?

      YES! The P-TEC 8400 is a Polyurethane paste 100% Solid and 0% VOC. Therefore it can be use safely on charcuterie board or Serving trays. 

    • Will the P-TEC take stains and oils?

      Once fully cured the P-TEC 8400 can be light sanded and will take stains, oils and pigments that are ZERO VOC. Make sure to test on a small piece to validate the compatibility with your finishing products.

    • How high should the PTE-8400 be sanded?

      We recommend 150-250 for the best results and not exceeding 400 grit for the only reason that if the P-TEC 8400 is sanded too high, the surface will become too smooth for the finishing products to link.

Chill Drops

Written by jsroch on . Posted in Products. Leave a Comment

Chill drops

Opaque and transparent liquid dyes

See available color

WATCH IT IN HD – FULL SCREEN

Description

CHILL DROPS TR (TRANSPARENT) AND OP (OPAQUE) are high quality epoxy  base reactive pigments to use with our different                          CHILL EPOXY™ solutions.

Without any VOC, alcohol, water and totally reactive, in opposition of what is actually offered in the market, the CHILL DROPS TRANSPARENT and CHILL DROPS OPAQUE are the only recommended pigments to use with the CHILL EPOXY solutions for a pure long lasting color.

Characteristics

  • Highly concentrated pigments
  • 100 % solid reactive pigments

  • NO VOC

  • Bright and Pure colors

  • For use with CHILL EPOXY ™ liquid resins.

  • Excellent resistance to UV rays.

  • Medium viscosity

  • Vast selection of  pure colours

  • Meets the RoHS standard

Applications

Store CHILL DROP OPAQUE on a shelf (do not store directly on the floor) @ 22C (72F) with relative humidity less than 60%. A cold environment will increase the viscosity of the pigment and a warmer environment will decrease it.

This is an extremely concentrated color pigment. We suggest the user to determine the amount of pigment to add to the mixture by adding gradually a few drops to the mixture A/B.

Advice

Make sure to shake well before use. Be sure to wipe the bottle with isopropyl alcohol to keep it clean. 

Please consult POLYMERES TECHNOLOGIES for more details based on your application. 

   support@polymerestechnologies.com

 

  • Products

    CHILL DROPS TR (TRANSPARENT) AND OP (OPAQUE) are high quality epoxy reactive pigments to use with our different CHILL EPOXY solutions.

    Without any VOC and totally reactive, in opposition of what is actually offered in the market, the CHILL DROPS TR and CHILL DROPS OP are the only recommended pigments to use with the CHILL EPOXY solutions.

    The CHILL DROPS  are highly concentrated  which will easily pigment your different CHILL EPOXY solutions.  Just a few drops and your resin will reach a transparent, translucent or an opaque color. 

    These high quality pigments will give pure, bright and explosive colors which will resist overtime. 

    We strongly recommend to validate the percentage of pigment to be added to your resins before going on production. 

    Remember to add a small quantity at the time in order to reach the desired color.  If you want to repeat the  color, make sure to take notes of the percentage added per litre or gallons.

    We recommend to start the coloration with a very low percentage of 0,0250% in weight to 3.0%.  You can also pigment the resin from drop to drop until the desired color.

    More than 40 colors are offered in our portfolio.

    « COLORS IS A POWER WHICH DIRECTLY INFLUENCES THE SOUL » Wassily Kandinsky

     

  • Typical properties

    AT 22°C / 72°F

    Viscosity Brookfield (cps) 6457 cps – 13,558 cps
    Consistency   Liquid
    Density g/cm3 1.08-1.37
    Type of coloration By volume Opaque or Transparent

  • Questions

Available colorS

  • NAVY Blue

    Opaque – Transparent

  • Lime Green

    Opaque – Transparent

  • Red

    Opaque – Transparent

  • Yellow

    Opaque – Transparent

  • lavender

    Opaque – Transparent

  • Orange

    Opaque – Transparent

  • royal blue

    Opaque – Transparent

  • Black

    Opaque – Transparent

  • Grey

    Opaque – Transparent

  • White

    Opaque

  • Baby Blue

    Opaque – Transparent

  • Pink

    Opaque – Transparent

  • Forest Green

    OPAQUE – TRANSPARENT

  • violet

    OPAQUE – TRANSPARENT

  • Sky Blue

    OPAQUE – TRANSPARENT

  • Burgundy

    OPAQUE – TRANSPARENT

  • Lilac

    OPAQUE – TRANSPARENT

  • Magenta

    OPAQUE – TRANSPARENT

  • Aqua Blue (Green/Blue)

    OPAQUE – TRANSPARENT

Chill 3D

Written by jsroch on . Posted in Products. Leave a Comment

Chill 3D™

1:1 ratio Transparent epoxy resin for doming effects, countertop or thin layers

Description

CHILL 3D™  is a 100% reactive Epoxy System with medium viscosity and high ultraviolet resistance.

The CHILL 3D™  allows to give depth and brilliance to your artistic canvas, countertop or other substrates such as concrete, wood, metals among others.

Ideal for “lacing effects” and “beach scenes” on wooden surfaces.

The CHILL 3D™  is the ideal product for thiner layers and can be poured up to 0.5 inch thick. Its thixotropic characteristics makes it possible to stabilize the pigments and avoid a separation in the casting.

Its pot life of 60 mins at 22C/72F also allows fast handling time, depending on the density and design of the piece.

This system also meets the European RoHS standard.

Characteristics

  • Crystal clear transparency
  • High quality raw materials

  • Easy mixing ratio of 1A/1B by volume

  • Excellent UV resistance
  • Glossy Finish

  • Excellent heat resistance 

  • Excellent impact resistance
  • Medium viscosity
  • Meet the RoHS standard
  • No withdrawal

Applications

Store CHILL 3D™ on a pallet (do not store directly on the floor) or shelf @ 22C/72 with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL 3D™, be sure to mix each Part A and Part B. Minimize air formation as much as possible by gently mixing for a minimum of 8 to 10 minutes with a metal spatula.

Mix exactly 1 parts of A with 1 part of B by volume (or 100 A / 85 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 60 minutes @ 22C/72F  for a mass of 200 grams, be sure not to mix more material that can be applied within the pot life time.

It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using Isopropyl alcohol or T-901 solvent.

  • Products

    The CHILL 3D™ is an easy of 1-1 ratio in volume that was initially designed for artists or for countertop designs. This epoxy solution because of its slightly higher viscosity will allow you to created 3D effect on canvases, wooden surface or different artistic pieces.

    It is commonly used for thin layers over charcuterie boards and use to create lace effects or beach scenes using different colors.  With its Pot life of 60 minutes at  72°F, you will have plenty of time to mix and create your next masterpiece.

    CHILL 3D™ is also used as a doming to protect specific area of an electronic card.

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 3600 3400 3500
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.141 0.975 1.054
    Mixing Ratio By volume 1 1 1/1
    Mixing Ratio By weight 100 85 100/85
    Color   Transparent Transparent Transparent
    Pot life   60 minutes 60 minutes 60 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 161°C 161°C 161°C
    Full cure*   3 days @ 22°C 3 days @ 22°C 3 days @ 22°C

  • Questions

    • How thick can the CHILL 3D be poured?

      The CHILL 3D is the ideal product for casting up to 0.500 inches thick. Its characteristic of thixotropy makes it possible to stabilize the pigments and to avoid a separation in the casting.

    • Do I need to use an heat gun or torche with the CHILL 3D 1:1 ratio?

      Even if the CHILL 3D is higher in viscosity than all our other epoxy solutions, it doesn’t any heat sources to get rid of the bubbles. The bubbles will pop on their own within minutes.

    • Item 3

      Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat proident.

  • 1

  • 1

  • 1

  • 1

  • 1

  • 1

A subsidiary of

Copyright © 2020 Chill Epoxy ™

450-250-3058
info@chillepoxy.com
Location
Terms and Conditions
Privacy Policy
Return and Refund Policy