Fast Setting Epoxy Resin

Fast-Setting-Epoxy-resin

Fast Setting Epoxy Resin – CHILL FIX is an excellent choice for wood restoration and touch-ups after casting. This product offers an ultra-fast setting time and outstanding adherence to optimize your production time. With its low viscosity, the CHILL FIX is ideal to fill small cracks, pin holes or any small repairs that need to be filled. With a pot life of only 13 minutes this Ultra-Fast Setting cures in less than a few hours only. Its high reactivity allows you to quickly fill any small repairs in a short period and be able to sand the surface in no time. CHILL FIXTM is an epoxy system with high UV resistance made with 100% reactive materials. It is an excellent choice for wood restoration and touch-ups after casting.

This product offers an ultra-fast setting time and outstanding adherence to optimize your production time. This product can be applied on all wooden surfaces that are free of grease or contaminants to repair voids, cracks, and knots. Can be sanded 3 hours after application. 100% solid, without any VOC the CHILL FIX will offer you an extreme mechanical strength and stress resistance. This system was developed especially for small casting or thin layers without any compromise. 

 APPLICATION 

CHILL FIX can be applied on all wooden surfaces that are free of grease or contaminants to repair voids, cracks and knots. Be ready to sand the epoxy in less than 3 3 hours after application. 

Fast Setting Epoxy Resin INSTRUCTIONS

PREPARATION

Before using CHILL FIX, mix 2 parts of A with 1 part of B by volume (or 100 A for 44 B by weight). Mix slowly and evenly for about 2 minutes, making sure to scrape the edges and bottom of the container with a metal spatula.

USAGE

Since the pot life of this system is only 13 minutes long at 22°C (72°F) for a mass of 200g, make sure not to mix more material than what can be applied within this time frame. It is important to note that pot life will shorten in a warmer environment
and will lengthen in a cooler one. Also, the more resin is mixed, the more its pot life decreases. Do not mix more than 150mL at a time. The remaining unused mixture might emit a lot of heat; beware of burn risks. Always test the product on a sample
prior to using it on a project.

S T O R A G E

In conclusion, store CHILL FIX on a pallet or shelf at 22°C (72°F) with a relative humidity of less than 60%. A cold environment will increase the viscosity of parts A and B and a warm environment will decrease it. Uncured material can be easily cleaned with isopropyl alcohol or with the  POLY CLEANER from Polymeres Technologies INC.