Chill 3D™

1:1 ratio Transparent epoxy resin for doming effects, countertop or thin layers

Description

CHILL 3D™  is a 100% reactive Epoxy System with medium viscosity and high ultraviolet resistance.

The CHILL 3D™  allows to give depth and brilliance to your artistic canvas, countertop or other substrates such as concrete, wood, metals among others.

Ideal for “lacing effects” and “beach scenes” on wooden surfaces.

The CHILL 3D™  is the ideal product for thiner layers and can be poured up to 0.5 inch thick. Its thixotropic characteristics makes it possible to stabilize the pigments and avoid a separation in the casting.

Its pot life of 60 mins at 22C/72F also allows fast handling time, depending on the density and design of the piece.

This system also meets the European RoHS standard.

Characteristics

  • Crystal clear transparency
  • High quality raw materials
  • Easy mixing ratio of 1A/1B by volume

  • Excellent UV resistance
  • Glossy Finish
  • Excellent heat resistance 

  • Excellent impact resistance
  • Medium viscosity
  • Meet the RoHS standard
  • No withdrawal

Applications

Store CHILL 3D™ on a pallet (do not store directly on the floor) or shelf @ 22C/72 with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL 3D™, be sure to mix each Part A  (RESIN) and Part B (HARDENER).

Minimize air formation as much as possible by gently mixing for a minimum of 8 to 10 minutes with a metal spatula.

Mix exactly 1 part of “A” with 1 part of “B” by volume (or 100 A / 85 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 60 minutes @ 22C/72F be sure not to mix more material that can be applied within the pot life time.

It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using Isopropyl alcohol or T-901 solvent.

  • Products

    The CHILL 3D™ is an easy of 1-1 ratio in volume that was initially designed for artists or for countertop designs. This epoxy solution because of its slightly higher viscosity will allow you to created 3D effect on canvases, wooden surface or different artistic pieces.

    It is commonly used for thin layers over charcuterie boards and use to create lace effects or beach scenes using different colors.  With its Pot life of 60 minutes at  72°F, you will have plenty of time to mix and create your next masterpiece.

    CHILL 3D™ is also used as a doming to protect specific area of an electronic card.

  • Typical properties

    AT 22°C / 72°F
        Part A Part B Mixed
    Viscosity Brookfield (cps) 3600 3400 3500
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.141 0.975 1.054
    Mixing Ratio By volume 1 1 1/1
    Mixing Ratio By weight 100 85 100/85
    Color   Transparent Transparent Transparent
    Pot life   60 minutes 60 minutes 60 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 161°C 161°C 161°C
    Full cure*   3 days @ 22°C 3 days @ 22°C 3 days @ 22°C
  • Questions

    • How thick can the CHILL 3D be poured?

      The CHILL 3D is the ideal product for casting up to 0.500 inches thick. Its characteristic of thixotropy makes it possible to stabilize the pigments and to avoid a separation in the casting.

    • Do I need to use an heat gun or torche with the CHILL 3D 1:1 ratio?

      Even if the CHILL 3D is higher in viscosity than all our other epoxy solutions, it doesn’t any heat sources to get rid of the bubbles. The bubbles will pop on their own within minutes.

    • Item 3

      Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat proident.