Chill Diamond Fast™ 




CHILL DIAMOND™  is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet.

CHILL DIAMOND FAST™  is ideal to fill small cracks, voids and knots. It can also be use to cast small transparent objects or colored jewels such as earrings, necklaces, bracelets, hairpins, cufflinks and others.

Its pot life allows a fast handling time, less than 12 hours. His very low viscosity allows a maximum infiltration of the interstices in the moulds or the different substrates on which CHILL DIAMOND™  is poured.

This system also meets the European RoHS standard.


  • Crystal clear transparency
  •  24 minutes of pot life

  • 100% solid, without VOC
  • Excellent heat resistance

  • Very low viscosity
  • Easy mixing ration of 2A/1B by volume
  • Excellent UV resistance
  • Glossy Finish
  • High quality raw materials
  • No withdrawal
  • Excellent impact resistance


Store CHILL DIAMOND FAST™  on a pallet (do not store directly on the floor) or shelf @ 22C/72F with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL DIAMOND FAST™ , be sure to mix each Part A (RESIN) and B (HARDENER).

Minimize air formation as much as possible by gently mixing for a minimum of 8 to 10 minutes with a metal spatula.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 24 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products


     Very simple…Because this system is our most reactive to this date. With a Pot life of 24 minutes at 72F and a Ratio of 2:1 by volume, this fast setting epoxy is ideal for filling small cracks, voids and knots on wooden surfaces.

    Who wants to wait 3 days when filling small cracks or casting small mass anyway? Well, The DIAMOND FAST ™ will cure in less than 12-24 hours depending on the mass.

    Also ideal for the rapid production and release of small casting such as jewelry or other artistic and industrial pieces. It is also commonly use to seal live edge prior to pour a river table.

  • Typical properties

    AT 22°C / 72°F
        Part A Part B Mixed
    Viscosity Brookfield (cps) 675 40 185
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.125 0.948 1.078
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   24 minutes 24 minutes 24 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 168°C 168°C 168°C
    Full cure*   2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece.