Chill drops

Opaque and transparent liquid dyes

WATCH IT IN HD – FULL SCREEN

Description

CHILL DROPS TR (TRANSPARENT) AND OP (OPAQUE) are high quality epoxy  base reactive pigments to use with our different                          CHILL EPOXY™ solutions.

Without any VOC, alcohol, water and totally reactive, in opposition of what is actually offered in the market, the CHILL DROPS TRANSPARENT and CHILL DROPS OPAQUE are the only recommended pigments to use with the CHILL EPOXY solutions for a pure long lasting color.

Characteristics

  • Highly concentrated pigments
  • 100 % solid reactive pigments
  • NO VOC

  • Bright and Pure colors

  • For use with CHILL EPOXY ™ liquid resins.

  • Excellent resistance to UV rays.

  • Medium viscosity
  • Vast selection of  pure colours

  • Meets the RoHS standard

Applications

Store CHILL DROP OPAQUE on a shelf (do not store directly on the floor) @ 22C (72F) with relative humidity less than 60%. A cold environment will increase the viscosity of the pigment and a warmer environment will decrease it.

This is an extremely concentrated color pigment. We suggest the user to determine the amount of pigment to add to the mixture by adding gradually a few drops to the mixture A/B.

Advice

Make sure to shake well before use. Be sure to wipe the bottle with isopropyl alcohol to keep it clean. 

Please consult POLYMERES TECHNOLOGIES for more details based on your application. 

   support@polymerestechnologies.com

 

  • Products

    CHILL DROPS TR (TRANSPARENT) AND OP (OPAQUE) are high quality epoxy reactive pigments to use with our different CHILL EPOXY solutions.

    Without any VOC and totally reactive, in opposition of what is actually offered in the market, the CHILL DROPS TR and CHILL DROPS OP are the only recommended pigments to use with the CHILL EPOXY solutions.

    The CHILL DROPS  are highly concentrated  which will easily pigment your different CHILL EPOXY solutions.  Just a few drops and your resin will reach a transparent, translucent or an opaque color. 

    These high quality pigments will give pure, bright and explosive colors which will resist overtime. 

    We strongly recommend to validate the percentage of pigment to be added to your resins before going on production. 

    Remember to add a small quantity at the time in order to reach the desired color.  If you want to repeat the  color, make sure to take notes of the percentage added per litre or gallons.

    We recommend to start the coloration with a very low percentage of 0,0250% in weight to 3.0%.  You can also pigment the resin from drop to drop until the desired color.

    More than 40 colors are offered in our portfolio.

    « COLORS IS A POWER WHICH DIRECTLY INFLUENCES THE SOUL » Wassily Kandinsky

     

  • Typical properties

    AT 22°C / 72°F
    Viscosity Brookfield (cps) 6457 cps – 13,558 cps
    Consistency   Liquid
    Density g/cm3 1.08-1.37
    Type of coloration By volume Opaque or Transparent
  • Questions

Available colorS