Chill Ice 2

Transparent epoxy resin for 2 inch castings

Description

CHILL ICE 2™ is a 100% reactive epoxy system with very low viscosity and high ultraviolet resistance. The CHILL ICE 2™ makes it possible to cast river tables up to 2 inch thick up to 60L, in a single casting, while maintaining its transparency and high precision.

Its long pot life makes it possible to mix several liters at a time and to pour a large quantity of resin during the production of the river table.

This system also meets the European RoHS standard.

Characteristics

  • High quality raw materials
  • Easy mixing ration of 2A/1B by volume
  • Excellent UV resistance
  • Glossy Finish
  • Excellent impact resistance
  • Very low viscosity
  • Crystal clear transparency
  • Meet the RoHS standard
  • No withdrawal

Applications

Store CHILL ICE # 2 on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it.

Before using CHILL ICE # 2, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 5 to 10 minutes with a metal spatula.

Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 600 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

  • Products

    CHILL ICE 2™ – 2:1 ratio is our most polyvalent epoxy solution when it comes to slow setting epoxy. This system will allow you to cast 2-inch-thick river tables when doing medium to big size projects. The CHILL ICE 2™ can also be used to encapsulate objects using molds. Its extended pot life makes it possible to mix several liters at a time and to pour a large quantity of resin in a single pour without overheating or the need to use Fans or AC during the production of river tables.

  • Typical properties

    AT 22°C / 72°F
        Part A Part B Mixed
    Viscosity Brookfield (cps) 750 55 200
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.095 0.955 1.048
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   600 minutes 600 minutes 600 minutes
    Gel Time   750 minutes 750 minutes 750 minutes
    Peak Exothermic Temperature ASTM D 2471-71 82°C 82°C 82°C
    Full cure*   7 days @ 22°C 7 days @ 22°C 7 days @ 22°C