CHILL SEALER™ is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet rays.
CHILL LIVE EDGE SEALER™ is ideal to sealing live edges of any wood essence to be used on river tables or any type of wood assemblies. Its very low viscosity will allow to deeply penetrate in the wood fibers and avoid air bubbles to form upon the exothermic reaction of the CHILL CLEAR™ CHILL ICE 1™, CHILL ICE 2™ and CHILL DEEP POUR™
One of the main features of the CHILL SEALER™ is its fast-drying time of less than 4-6 hours at 22°C.
The recoat time is less than 3 hours at 22°C. This can change depending of the coat thickness and ambient temperature.
High quality raw materials
Easy mixing ratio of 2A/1B by volume
Super fast curing time
Excellent UV resistance
Water like viscosity to avoid bubbles
Short pot life
Before using CHILL SEALER™, make sure the wooden/epoxy sections section are free on any contaminant (dirt, oil and grease).:
We recommend to apply from 2-3 coats with a brush or a roller. The number of coats will depend of the wood density.
The main objective is to get a plastic finish on the surface of the live edge. Make sure to apply an equal layer on the live
edge slabs to totally airtight the wood.
Only mix the amount of epoxy and hardener together that can be used within the working time.
Mix 2 parts of “A” to 1 part of “B” by volume until colour is uniform. A small variance in mixing ratio can modify physical properties.
WE RECOMMAND TO MIX A MAXIMUM OF 300 mL