CHILL SEALER – Fast drying seal coat epoxy

$50,38

CHILL SEALER™ is fast drying seal coat epoxy system with 100% reactive materials with a very low viscosity. CHILL SEALER™ is ideal to sealing live edges of any wood essence to be used on river tables or any type of wood assemblies. Its very low viscosity will allow to deeply penetrate in the wood fibers and avoid air bubbles to form upon the exothermic reaction of the CHILL CLEAR™ CHILL ICE 1™, CHILL ICE 2™ and CHILL DEEP POUR™

One of the main features of the CHILL SEALER™ is its fast-drying time of less than 4-6 hours at 22°C.  The recoat time is less than 3 hours at 22°C.  This can change depending of the coat thickness and ambient temperature.

We recommend to apply from 2-3 coats with a brush or a roller. The number of coats will depend of the wood density.  The main objective is to get a plastic finish on the surface of the live edge. Make sure to apply an equal layer on the live edge slabs to totally airtight the wood

Product Features:

  • Ideal for to seal live edge or any wood surfaces to stabilize it
  • 100% solid, without VOC
  • Food Safe
  • Quick Pot life and Fast Curing time
  • Very low viscosity
  • High-Gloss
  • Heat and Impact Resistance
  • Very durable
  • Water like viscosity to avoid bubbles
  • Can be colored with one of our CHILL DROPS™ or metallic pigments.
  • Very strong mechanical strength and stress resistance

Product characteristiques:

  • Easy Mixing Ratio: 2:1 by volume or 100/45 by weight
  • Ideal Working Temperature: 22C /72F
  • Pot Time: 20 minutes at 22C/72F depending on volumes and room temperature
  • Cure Time: 4-6 hours depending on volume, room temperature, humidity level, and thickness of the casting
  • Recommended Thickness per Layer: 1/8 -1/4
  • WARNING : SHORT POT LIFE, DO NOT MIX MORE THAN 300ML AT A TIME OR RISK OF OVERHEATING OF LEFT IN MASS TOO LONG
  • Maximum Thickness in a single pour: 1/4 max
  • Cure Appearance: Optical Clarity
  • Viscosity:  275CPS Mixed – Very low Viscosity for a better penetration
  • Recommended cleaning products: POLY CLEANER™ Resin Cleaner or Isopropyl Alcohol

In stock

SKU: CHILLSEALER-KIT-1.5L Category:

Description

APPLICATION:

Before using CHILL SEALER™, be sure to mix each Part A and B. Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 45 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container.

Since the pot life of the system is 20 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot.

We recommend to mix A MAXIMUM OF 300ML A TIME. After mixing, spread immediately the resin of the live edge and brush until complete application. 

It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be.

Uncured material can be easily cleaned using the POLY CLEANER ™.

Additional information

Weight 2.26 kg
Dimensions 15.25 × 15.24 × 25.4 cm
Size

1.5L

You may also like…

Related products