Fast Curing & Quick Repairs Epoxy Resin | Quick Drying | CHILL FIX 2:1

Fast Curing & Quick Repairs Epoxy Resin | Quick Drying | CHILL FIX 2:1. CHILL FIX™ – a Low Viscosity, Fast Cure Clear Epoxy Resin. Specifically engineered for rapid curing and high durability, CHILL FIX™ is ideal for small repairs, castings, and filling cracks and voids in wooden substrates such as river tables and serving boards.

With a pot life of just 13 minutes and a full cure time of a few hours, CHILL FIX™ ensures swift project completion. Its low viscosity and high reactivity facilitate easy handling and efficient filling of minor repairs. Additionally, its high ultraviolet resistance makes it suitable for outdoor use.

CHILL FIX™ can be pigmented with CHILL DROPS™ opaque and transparent series and is compatible with metallic pigments. Available in a 1.5L format (larger sizes upon request), this VOC-free epoxy filler is 100% solid and excels in filling small cracks, voids, knots, or delicate castings like jewelry.

Featuring a high-gloss finish, heat and impact resistance, and extreme mechanical strength and stress resistance, CHILL FIX™ guarantees impeccable results. To optimize performance, ensure a clean surface free from contaminants, and maintain an ideal working temperature of 22°C/72°F.

For best results, apply at a thickness per layer of 1/16 to 1/4 or for small masses, avoiding exceeding a maximum thickness of 1/4 in a single pour. CHILL FIX™ – your efficient solution for small project needs.

Quick-Set Clear Epoxy Resin – CHILL FIX™ 2:1

Features:

• Ideal for small projects and masses or layer up to 1/4” thick
• 100% solid, without VOC
• It is commonly used to fill small cracks, voids, knots, or small casting such as jewelry.
• Quick pot life and fast curing time
• High-gloss
• Heat and impact resistance
• Very durable
• Water like viscosity to avoid bubbles
• It can be colored with one of our liquid or metallic pigments.
• Extreme mechanical strength and stress resistance

Characteristics:

• Easy mixing ratio: 2:1 by volume or 100/44 by weight
• Ideal working temperature: 22C /72F
• Pot time: 13 minutes at 22C/72F depending on volumes and room temperature
• Cure time: 3-6 hours depending on volume, room temperature, humidity level, and thickness of the casting
• Recommended thickness per layer: 1/16 -1/4 or small masses
• Maximum thickness in a single pour: 1/4 max
• Cure appearance: Optical clarity
• Viscosity: 325 CPS mixed – Very low viscosity for a better penetration
• Recommended cleaning products: POLY CLEANER™ Resin cleaner or isopropyl alcohol

Applications:

Note: Before using epoxy filler CHILL FIX™, make sure the wooden/epoxy section is free of any contaminant (dirt, oil, and grease).

Surface Preparation: Protect the work area from accidental spills. Slightly rough down repair area. Heat is generated while the epoxy mixture cures; the more epoxy and hardener are mixed, the more heat is generated, causing the epoxy mixture to cure faster. Only mix an amount of epoxy and hardener that you can use within the product’s pot life.

Important Instructions: Mix 2 parts of “A” to 1 part of “B” by volume until the color is uniform. A small variance in the mixing ratio can modify the product’s physical properties.  

Warning: Short pot life, DO NOT MIX more than 150ML  at a time or risk of overheating of left in mass too long.