Discover the Benefits of Using an Epoxy Resin Silicone Release Agent

Epoxy Resin Silicone Mold Release. Epoxy is a versatile material that can be used to create a wide range of products and art pieces. However, one of the biggest challenges in working with epoxy is ensuring that it doesn’t stick to the mold and ruining your project. In this article, we will discuss three methods for releasing epoxy from molds: The Cheap, The Fast, and The Expensive.

The CHEAP: Tuck Tape, TYVEK or Any Polypropylene Tape Applying this tape inside the mold will allow you to pour the epoxy directly on the smooth side of the tape without any worry of sticking. This is a cheap solution that can be found in most hardware stores. The downside of using this method is that it takes more time to apply, and the tape marks will leave imperfections that need to be sanded or planned.

The FAST: CHILL RELEASE 110™ Silicone-Based Release Agent This is a fast and easy solution for releasing epoxy from molds. CHILL RELEASE 110™ is a silicone-based release agent that comes in liquid form and can be easily applied with a brush or clean cloth. Two coats, 15 minutes apart, and you’re ready to pour. Simply follow the instructions for best results.

The EXPENSIVE: High-Density Polyethylene (HDPE) HDPE is a polyethylene thermoplastic that comes in 1/2 and 3/4 sheets and is ideal for creating molds. Epoxy does not stick to HDPE, but the downside of this method is the price.

Silicone Epoxy Molds and CHILL RELEASE 110 If you’re tired of using tape and dealing with tape marks on the bottom surface of your epoxy project, CHILL RELEASE 110 is the best alternative for professional epoxy users. This silicone-based compound is specifically formulated as a release agent for epoxy, rigid, elastomeric polyurethane, and metal molds. It allows for easy removal of epoxy projects and can be applied to any surface, especially melamine.

Epoxy Resin Mold Release Agent: Specifications CHILL RELEASE 110™ is a one-component product that is easy to use and apply with a clean brush or cloth. It does not damage your mold or equipment and does not affect your epoxy. Additionally, it improves molding efficiency and extends the life of your epoxy mold. It is recommended for use with all CHILL EPOXY™ systems and is available in .500ml and 1L formats.

Applications: To get the best results, it is recommended to apply 2 to 3 layers of 0.001 inches on a new mold. Make sure to let the release agent sit for 2-3 minutes at 22°C before applying another layer. Use a clean cotton cloth or paintbrush to avoid drips.

• FAQs:

  Q: How do I know when to apply CHILL RELEASE 110™?

  A: You should apply CHILL RELEASE 110™ before pouring epoxy resin into the mold. Two to three coats of the release agent applied with a clean brush or cloth, allowing 15 minutes in between coats, will ensure a successful release.

  Q: Can CHILL RELEASE 110™ be used with other resin systems?

  A: CHILL RELEASE 110™ is specifically formulated for use with CHILL EPOXY™ systems but can also be used with other epoxy, polyurethane, and metal molds.

  Q: How long does CHILL RELEASE 110™ last?

  A: The longevity of CHILL RELEASE 110™ depends on how often you use your mold and the conditions in which it is stored. Proper storage and use can extend the life of the release agent.

  CHILL RELEASE 110™ is the ultimate solution for releasing cured epoxy projects from molds. This silicone-based release agent offers a fast, clean, and effective solution that eliminates the need for tape, saving time and effort. Whether you are a professional epoxy user or a DIY enthusiast, CHILL RELEASE 110™ is the solution you need to unleash your creativity and make your projects a success.