CHILL DROPS™ Transparent & Opaque are high-quality epoxy-based 100% reactive pigments to use with our different clear CHILL EPOXY™ solutions. Those pigments have been formulated to completely merge with our resin formulations and create long-lasting colors that won’t fade away with time. Since our epoxy-based pigments are highly concentrated,only a tiny amount is required to create stunning colors.
ROYAL BLUE LIQUID DYE PIGMENT FOR EPOXY RESIN – CHILL DROPS™
ROYAL BLUE LIQUID DYE PIGMENT FOR EPOXY RESIN – CHILL DROPS™ are 100% reactive epoxy based liquid pigments available in OPAQUE, TRANSPARENT or TRANSLUCENT options depending on color. Fully compatible with the CHILL EPOXY™ product range, they will allow you to obtain pure colors by gradually using between 0.0250% up to 5% w/v in the A/B mixture until you reach the desired color .
ROYAL BLUE LIQUID DYE PIGMENT FOR EPOXY RESIN
In addition, without any VOC-Volatile Organic Compounds, alcohol or water, unlike what exists on the market. CHILL DROPS™ are the only pigments recommended for use with CHILL EPOXY™ solutions for pure, long-lasting color. For use with our CHILL EPOXY™ liquid resins. Store CHILL DROPS™ on a shelf (do not store directly on the floor) at 22°C with less than 60% relative humidity. A cold environment will increase the viscosity of the pigment and a warmer environment will decrease it. It is therefore a very concentrated color pigment. We suggest the user determine how much dye to add to the mix by gradually adding a few drops to the A/B mix.
Contact POLYMÈRES TECHNOLOGIES for more information. firstname.lastname@example.org
For use with CHILL EPOXY™ Clear Epoxy Resins.
Non-toxic and odorless
Meets RoHS standard
Highly concentrated pigments
Easily produce transparent or opaque colors (depending on the system used)
100% solid reactive pigments
Extensive choice of pure colors: more than 20 different colors available
Wear latex gloves to avoid staining your hands.
Be sure to shake well before use.
Be sure to wipe down the bottle with our POLY CLEANER™ or isopropyl alcohol to keep it clean.
Shake well before use. We suggest the user determine the amount required by gradually adding a few drops to the A/B mixture. We recommend gradually incorporating 0.25% to 5% to achieve the desired color. The more drops added to the resin, the darker the color. Some tests may have to be done before reaching the desired color.