Author: Jean-David Roy

CHILL SEALER™

CHILL SEALER™

FAST SETTING SEAL COAT EPOXY RESIN
FOR SEALING LIVE EDGE OR WOOD SURFACES

TRY IT NOW

Description

CHILL SEALER™ is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet rays.

CHILL LIVE EDGE SEALER™ is ideal to sealing live edges of any wood essence to be used on river tables or any type of wood assemblies. Its very low viscosity will allow to deeply penetrate in the wood fibers and avoid air bubbles to form upon the exothermic reaction of the CHILL CLEAR™ CHILL ICE 1™, CHILL ICE 2™ and CHILL DEEP POUR™

One of the main features of the CHILL SEALER™ is its fast-drying time of less than 4-6 hours at 22°C.

The recoat time is less than 3 hours at 22°C. This can change depending of the coat thickness and ambient temperature.

BUY NOW

Technical Data Sheet

Fiche Technique

Characteristics

  • High quality raw materials

  • VOC free

  • Easy mixing ratio of 2A/1B by volume

  • Super fast curing time

  • Excellent UV resistance

  • Water like viscosity to avoid bubbles

  • Glossy Finish

  • Eco-Friendly

  • Short pot life

Applications

Before using CHILL SEALER™, make sure the wooden/epoxy sections section are free on any contaminant (dirt, oil and grease).:

We recommend to apply from 2-3 coats with a brush or a roller. The number of coats will depend of the wood density.


The main objective is to get a plastic finish on the surface of the live edge. Make sure to apply an equal layer on the live
edge slabs to totally airtight the wood.

Only mix the amount of epoxy and hardener together that can be used within the working time.

Mix 2 parts of “A” to 1 part of “B” by volume until colour is uniform. A small variance in mixing ratio can modify physical properties.

 WE RECOMMAND TO MIX A MAXIMUM OF 300 mL 

  • Products

    CHILL SEALER™ is fast drying seal coat epoxy system with 100% reactive materials with a very low viscosity. CHILL SEALER™ is ideal to sealing live edges of any wood essence to be used on river tables or any type of wood assemblies. Its very low viscosity will allow to deeply penetrate in the wood fibers and avoid air bubbles to form upon the exothermic reaction of the CHILL CLEAR™ CHILL ICE 1™, CHILL ICE 2™ and CHILL DEEP POUR™

    One of the main features of the CHILL SEALER™ is its fast-drying time of less than 4-6 hours at 22°C.  The recoat time is less than 3 hours at 22°C.  This can change depending of the coat thickness and ambient temperature.

    We recommend to apply from 2-3 coats with a brush or a roller. The number of coats will depend of the wood density.  The main objective is to get a plastic finish on the surface of the live edge. Make sure to apply an equal layer on the live edge slabs to totally airtight the wood

    Product Features:

    • Ideal for to seal live edge or any wood surfaces to stabilize it
    • 100% solid, without VOC
    • Food Safe
    • Quick Pot life and Fast Curing time
    • Very low viscosity
    • High-Gloss
    • Heat and Impact Resistance
    • Very durable
    • Water like viscosity to avoid bubbles
    • Can be colored with one of our CHILL DROPS™ or metallic pigments.
    • Very strong mechanical strength and stress resistance

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 675 40 185
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.125 0.948 1.078
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   24 minutes 24 minutes 24 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 168°C 168°C 168°C
    Full cure*   2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece.

BUY NOW

Continue reading

CHILL FIX™

CHILL FIX™

ULTRA FAST SETTING EPOXY
FOR SMALL CRACKS, VOIDS AND KNOTS

TRY IT NOW

Description

CHILL FIX™ is a 100% reactive ultra fast-setting epoxy system with very low viscosity and high ultraviolet resistance.

This product is perfect for repairing voids, cracks and knots on wooden substrates such as river tables, serving boards among others.

Its low viscosity and high reactivity allow to quickly fill any small repairs in a short period of time (few
hours). CHILL FIX™ can be pigmented with our CHILL DROPS™ opaque and transparent series.

It is also totally compatible with our metallic pigments.

The CHILL FIX™ is sold in format of 1.5L.

Larger formats available upon request.

BUY NOW

Technical Data Sheet

Characteristics

  • High quality raw materials

  • VOC free

  • Easy mixing ratio of 2A/1B by volume

  • Super fast curing time

  • Excellent UV resistance

  • Water like viscosity to avoid bubbles

  • Glossy Finish

  • Eco-Friendly

  • Short pot life

Applications

Before using CHILL FIX™, make sure the wooden/epoxy sections section are free on any contaminant (dirt, oil and grease).

SURFACE PREPARATION:

Protect work area from accidental spills. Slightly rough down repair area. Heat is generated while the epoxy mixture cures; the more epoxy and hardener that is mixed together, the more heat that is generated causing the epoxy mixture to cure faster.

Only mix the amount of epoxy and hardener together that can be used within the working time.

Mix 2 parts of “A” to 1 part of “B” by volume until colour is uniform. A small variance in mixing ratio can modify physical properties.

 WE RECOMMAND TO MIX A MAXIMUM OF 150 mL 

  • Products

    CHILL FIX™ is a 100% reactive ULTRA-FAST Setting clear epoxy with very low viscosity and high ultraviolet resistance. This system is ideal for quickly filling and repairing voids, cracks and knots on wooden substrates such as river tables, serving boards among others.

    Its low viscosity and high reactivity allow to quickly fill any small repairs in a short period of time (few hours) and be able to sand the surface in no time. CHILL FIX™ can be pigmented with our CHILL DROPS™ opaque and transparent series. It is also totally compatible with our metallic pigments and CHILL DROPS™ liquid pigments.

    Product Features:

    • Ideal for small projects and masses or layer up to 1/4” thick
    • 100% solid, without VOC
    • It is commonly used for filling small cracks, voids, knots or for small casting such as jewelry
    • Quick Pot life and Fast Curing time
    • High-Gloss
    • Heat and Impact Resistance
    • Very durable
    • Water like viscosity to avoid bubbles
    • Can be colored with one of our CHILL DROPS™ or metallic pigments.
    • Very strong mechanical strength and stress resistance

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 675 40 185
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.125 0.948 1.078
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   24 minutes 24 minutes 24 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 168°C 168°C 168°C
    Full cure*   2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece.

BUY NOW

Continue reading

POLY CLEANER™

POLY CLEANER™

HIGH PERFORMANCE RESIN CLEANER

BUY IT NOW

Description

POLY CLEANER™ is a high performance, VOC-free cleaner specially formulated by POLYMÈRES TECHNOLOGIES INC to help clean CHILL EPOXY™ product residues.

With this unique formula, you can easily clean any spills or traces of resin (epoxy, polyurethane, silicone) from your working surface, countertops, floors, as well as from your tools, spatulas, and containers.

POLY CLEANER™ is an excellent alternative to solvent-based products such as alcohol, acetone, petroleum, white spirit, or any harmful chemical.

BUY NOW

Technical Data Sheet

Characteristics

  • High performance resin cleaner

  • VOC free

  • Fresh odor

  • Best alternative to solvent

  • Ideal to clean and degrease in one step

  • Ideal for epoxy, polyurethane and silicone

  • Low viscosity

  • Eco-Friendly

  • High quality raw materials

Applications

Apply the POLY CLEANER™ to a clean cloth and wipe the soiled area. If the resin is almost or completely polymerized, apply a cloth soaked with POLY CLEANER™ to the stained area and let stand for 24 hours at 22°C. After this period, use a metal spatula to scrape off the resin residue. Repeat the procedure if necessary. When done, always wipe the surface with a clean, dry cloth to remove any POLY CLEANER™ residue. Always spot test prior to use.

Store product in a cool, dry, well-ventilated area at 22°C.

FOR INDUSTRIAL USE ONLY. Keep out of reach of children. Avoid direct contact with the product, wear gloves and goggles.

It is not recommended to apply the POLY CLEANER ™ on ABS, PVC, styrene or other similar plastic surface.

Always test the product on a sample.

  • Products

    Solvent-based cleaners remain popular in industrial applications due to their cleaning power; they remove resins, contaminants and greases. Some examples of strong cleaning solvents are acetone, methyl ethyl ketone and toluene among others.However, they’re highly corrosive substances which makes them effective but also increases the risk of health hazards. Most solvent-based cleaners contain VOCs (volatile organic compounds), all of which pose serious environmental and health concerns.

    Working with solvent-based cleaners may appear cost-effective in the short term but can put your yourself, employees and family at serious risk of developing short-term and long-term health issues.

    To protect our customer’s health, POLYMÈRES TECHNOLOGIES has formulated the POLY CLEANER™ which is a high performance, VOC free cleaner especially formulated to easily clean residues of CHILL EPOXY™ products.

    With this unique formulation, you can clean effectively any spilling, or resin traces (epoxy, polyurethane and silicone) on your working surface, counter tops, floors, as well as on your dirty tools, spatulas or containers.

    POLY CLEANER™ is an excellent alternative to solvent-based products such as alcohol, acetone, petroleum, white spirit or any harmful chemicals.

    The POLY CLEANER™ is “THE” best alternative to solvent.

     

  • Typical properties

    AT 22°C / 72°F

        Part A Part B Mixed
    Viscosity Brookfield (cps) 675 40 185
    Consistency   Liquid Liquid Liquid
    Density g/cm3 1.125 0.948 1.078
    Mixing Ratio By volume 2 1 2/1
    Mixing Ratio By weight 100 42 100/42
    Color   Transparent Transparent Transparent
    Pot life   24 minutes 24 minutes 24 minutes
    Gel Time   75 minutes 75 minutes 75 minutes
    Peak Exothermic Temperature ASTM D 2471-71 168°C 168°C 168°C
    Full cure*   2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece. 2-3 days @ 22°C depending on the design and the volume if the piece.

BUY NOW

Continue reading