Choosing the right product

CHILL EPOXY by Polymeres Technologies is offering specialized epoxy solutions for different application. We have developed over the years several system to answer many needs. From fast setting system to fill cracks, voids, knot or stabilize the wood up to Slow setting for Deep castings.

 

Among the range of CHILL EPOXY products are:
(Description)

CHILL CLEAR:

System used for maximum flows of 0.5 inches. Ideal for stabilizing wood (live edge), making jewelry or artistic parts, prototypes, protecting LED lights or using as brewing resin for small to medium sized parts.  Two versions available, either with 60 or 120 minutes of pot life time at 22 degrees C.

3D CHILL

Easy ratio of 1-1 in volume, this CHILL EPOXY product allows a 3D effect on canvases, wooden surface or different artistic pieces. Applies both vertically and horizontally. Ideal for sealing the sides of raw wood (live edge). Pot life time from 60 minutes to 22 degrees C.

CHILL DIAMOND FAST

EPOXY CHILL system for filling cracks and knots on wooden surfaces.  Ideal also for the manufacture and rapid removal of jewelry or other artistic and industrial pieces. Pot life time of 24 minutes at 22 degrees C. Ratio of 2-1 by volume.

ICE CHILL 1

Medium Setting casting resin for making river tables or projects between 0.5-1.5 inch thick and with a mass of up to 30 liters depending on the design of the river or project.  Low viscosity and quick and efficient off-bubble.

ICE CHILL 2

Epoxide casting resin for making river tables 2 inches thick and with a mass of up to 60 liters depending on the design of the river.  Low viscosity and quick and efficient off-bubble.

CHILL DEEP FOR

Epoxide casting resin for making river tables 2.0-2.5 inches thick and with a mass of up to 90 liters depending on the design of the river.  Low viscosity and quick unwinding and efficiency